The BOSS LS-2440 CO₂ laser cutter and engraver is designed to handle a wide range of materials for cutting, engraving, and marking applications. Below is a categorized list of materials compatible with the LS-2440:
Never attempt to cut or engrave the following materials in the laser cutter. Doing so can release highly toxic gases, damage the machine, or cause fire hazards. Always check material safety before use.
| Material | Danger |
|---|---|
| PVC (Polyvinyl Chloride) | Releases hydrochloric acid gas and chlorine fumes that are highly toxic and corrosive—will destroy the optics and electronics. |
| Vinyl | Contains chlorine compounds like PVC—do not use. |
| ABS Plastic | Produces cyanide and toxic fumes when vaporized. |
| Polystyrene Foam (Styrofoam) | Extremely flammable and melts easily, creating dangerous fire risks. |
| Polycarbonate (PC) | Often discolors or burns without cutting well; emits toxic smoke. |
| Fiberglass | Made of glass and resin—melts and gives off harmful fumes. |
| Coated Carbon Fiber | Releases toxic particulates and fumes when cut. |
| Mirrored Acrylic | Can reflect the laser beam, damaging the machine optics. |
Stick to laser-safe wood, acrylic, leather, cardboard, paper, and certain plastics. Use the material reference chart provided here to ensure clean, safe cuts every time.
Your safety—and the life of the laser cutter—depends on using the right materials.